|
|
|
|
|
|
|
|
Model: LKP SS1018
StratoGrey Static Shielding bag |
Buried metal construction provides double protection for sensitive electronic modules against static discharge. Amine/amide-free interior will not corrode polycarbonate surfaces and produces no outgassing. The semi-transparent material allows for easy identify caution of contents. Recommended for electronic boards and components. Because these bags are fully heat sealable the contents are effectively protected from moisture and foreign matter. Elkays focus on defect prevention versus defect detection builds quality into every bag. Meets the electrostatic requirements of MIL B-81705 Type 3. Specifications: Tensile Strength: 5800 psi MD, 6600 psi TD (Test: ASTM D-882-83 Method A) Burst Strength: 50 psi (Test: FTMS 101C Method 2007) Tear Strength (Notched): 2.7 lbs MD, 2.4 lbs TD (Test: ASTM D-1004-66) Hot Seal Strength: > 14 lbs/in width (Test: ASTM D-1876-72) Elongation at Break: 80% MD, 85% TD (Test: ASTM D-882-83 Method A) Puncture Strength: > 12 lbs (Test: FTMS 101C Method 2065.1) Light Transmission: 40% +/- 5% (Test ASTM D-1003-77) Moisture Vapor: 0.3 gms @ 100 deg F/90% R.H. (Test: ASTM F-1249) Total Material Thickness: 2.8 Mil (Test: ASTM D-2103. Electrical Properties: Static Decay Rate (5000V to 0V): < 0.03 seconds (Test: FTMS 101C Method 4046.1) Surface Resistivity: Outer Layer < 10^10 ohms/sq in avg; Metal Layer 50 ohms/sq in; Inner Layer < 10^10 ohms/sq in avg (Test: ASTM D-257) EMI Shielding (after flexing): > 10dB (between 1 and 10 GHz) (Test: MIL-PRF-81705D) Capacitive Probe (1 KV): < 20 volts (Test: EIA Std 541 Appendix E) Charge Generation (nominal): Teflon -0.9 ave nC/sq in; Quartz + 0.10 ave nC/sq in (Test: Modfied incline plane) |
|
|
|
|
|
Equivalent model numbers: LKPSS1018 LKP SS1018 |
|
Return Policy
|
|
|
|
|
|
|
|
NOTE: The product picture may display multiple products, accessories, or other items that are not included. The picture often represents the product family and may be used for multiple products within that family that differs in color, size, fragrance, or other features and characteristics. Refer to the product description and specifications and most importantly to the model number displayed above next to the word Model. Product specifications and descriptions may be incomplete. If you require specific features or a specific version of a product, contact the manufacturer & provide the model number to confirm the product matches your requirements before you purchase. The product color and finish displayed on the web site may vary from the actual product due to your monitor settings, lighting conditions, natural variation, and other factors. Styling, design, size, ingredients and other characteristics may change due to product updates by the manufacturer. We receive and ship sealed boxes and are unable to check or verify any such changes. We recommend that you contact the manufacturer and visit their web site to confirm the product matches your requirements. We are unable to research product specifications for you. We are not responsible if the specifications of the product do not match your requirements. Our customer service representatives may not recommned a product or tell you if a product matches your requirements. |
|
|
|
|